cecotec POWERGYRO 3500 ANGLE SET Bedienungsanleitung Seite 148

ENGLISH
Pre-maintenance works
Warning due to electrical voltage
Only the official Cecotec Technical Support Service or specialized or authorised companies can
carry out maintenance jobs and repairs that involve opening the casing.
Warning due to electrical voltage
1. Unplug the device.
2. Unplug the USB cable by pulling the connector, not the cable.
3. Allow the device to completely cool down.
Maintenance indications
It is not necessary to lubricate the machine.
Cleaning
It is necessary to clean the device before and after using it.
Note
It is not necessary to lubricate it after the clean-up.
Warning due to electrical voltage
– Liquids entering the casing can cause short circuits. Do not immerse the device into water
or any other liquid. Make sure any type of liquid does not enter the casing.
– To clean the external parts of the device, use a clean, soft, lint-free cloth, it may be slightly
moistened. Make sure moisture does not enter the casing or come into contact with any
electric component.
– Do not use detergents, aggressive cleaning agents or solvents, like cleaning sprays, paint
thinners, detergents containing alcohol or abrasive cleaners to moisten the cloth.
– To dry the device, use a clean, soft, lint-free cloth. And completely dry.
– Carefully clean the connection contacts.
– Protective devices, ventilation openings and the motor casing must always be kept free of
dust and other contamination.
Transport and storage
Note
You must transport and store the device properly, following the instructions in this manual, so
you do not harm it.
Transport
Follow at all times the following transport instructions:
148
POWERGYRO 3500 ANGLE SET
POWERGYRO 3500 X-TREME SET