cecotec POWERGYRO 3500 ANGLE SET Bedienungsanleitung Seite 149

– First, unplug the device.
– Unplug the USB cable by pulling the connector, not the cable.
– Allow the appliance to cool down completely.
– To transport lithium ion batteries you must take into account the provisions for the
transport of dangerous goods.
– You must take into account the following instructions to transport lithium ion batteries.
– The user can transport batteries by road without further requirements.
– To ship them through third parties (e.g. air transport or forwarding) you must take into
account the requirements you must meet regarding packaging and signalling. The
packaging must be made by an expert in dangerous goods.
– Before shipping the rechargeable battery, make sure the casing is in perfect conditions.
– You must also take into account additional national dispositions regarding shipping.
Storage
– First, unplug the device.
– Unplug the USB cable by pulling the connector, not the cable.
– Allow the appliance to cool down completely.
– Clean the device as described in the "Cleaning" section.
5. TROUBLESHOOTING
– During manufacturing, the correct operation of the device is checked on several occasions.
If faults still occur, check the device according to the following list.
– Troubleshooting that requires opening the housing must only be carried out by authorised
specialist companies or by Cecotec.
POWERGYRO 3500 ANGLE SET
POWERGYRO 3500 X-TREME SET
ENGLISH
149