End Of The Washing Programme; Removing The Load; Care And Cleaning; Cleaning The Filters - AEG Electrolux FAVORIT AAAUTO Benutzerinformation

End of the washing programme

Switch off the appliance in these conditions:
• The appliance stops automatically.
• The display shows 0.
• The end-of-programme indicator light comes on.
1. Press the on/off button.
2. Open the door.
3. For better drying results, keep the door ajar for some minutes before you remove the
dishes.
Let the dishes cool down before you remove them from the appliance. Hot dishes are easily
damaged.

Removing the load

• First remove items from the lower basket, then from the upper basket.
• There can be water on the sides and door of the appliance. Stainless steel becomes cool
more quickly than the dishes.

Care and cleaning

WARNING!
Switch the appliance off before you clean the filters.

Cleaning the filters

CAUTION!
Do not use the appliance without the filters. Make sure that the installation of the filters
is correct. Incorrect installation will cause unsatisfactory washing results and damage to
the appliance.
If necessary, clean the filters. Dirty filters decrease the washing results.
The dishwasher has three filters:
1. coarse filter (A)
2. microfilter (B)
3. flat filter
Do these steps to clean the filters:
1. Open the door.
2. Remove the lower basket.
Care and cleaning
45