Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The appliance is heavy. Care should be taken when moving it.
If your machine has wheels, remember that they are only used to facilitate small
movements. Do not move it on longer journeys.
Never use the base, drawers, doors etc. to stand on or as supports.
To avoid items falling and causing injury or damage to the appliance, do not overload
the door
racks or put too much food in the crisper drawers.
Caution! Care and cleaning
Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
Do not clean the appliance with metal objects, steam cleaner, ethereal oils,
organic solvents or abrasive
Do not use sharp objects to remove frost from the appliance. Use a plastic
Installation Important!
For electrical connection, carefully, follow the instructions given in this manual.
Unpack the appliance and check if there are damages on it. Do not connect the
appliance if it is damaged. Report possible damages immediately to the place you
bought it. In this case retain packing.
It is advisable to wait at least 24 hours before connecting the appliance to allow the
oil to flow back in the compressor.
Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to
installation.
Wherever possible the back of the product should not be too close to a wall to avoid
touching or catching warm parts (compressor, condenser) to prevent the risk of a
fire, follow the instructions relevant to installation.
The appliance must not be located close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.
ENERGY SAVINGS
To reduce the power consumption of your device:
Install it in a suitable location (see "Installing your appliance").
Keep the doors open for as short time as possible.
Do not put hot food into your device.
cleansers.
21
scraper.
Werbung
