Silvercrest SHH 150 E2 Bedienungsanleitung Seite 19

Before connecting the product,
check the electrical connection
data on the nameplate (voltage
and frequency) with the
electrical specifications of your
electrical network . It is important
to ensure that the specifications
match to avoid causing any
damage to the product .
Do not use extension cords or a
power strip .
Make sure that the power cord
is undamaged and is not routed
over hot surfaces and/or sharp
edges .
Take care to ensure that the
power cord is not bent, twisted
or wedged .
Repairs to electrical devices may
only be carried out by qualified
personnel who have been
trained by the manufacturer .
Unauthorised repairs can lead
to considerable hazards for the
user .
m WARNING! Fire hazard!
Never use the product close
to or below curtains or other
combustible materials .
Do not allow flammable
materials to come into contact
with the product .
18 GB/IE
Wall mounting: To avoid danger
to children, the product must be
mounted with its underside at
least 60 cm above the ground .
Mount the product so that
the on/off switch cannot be
operated by a person in the
bathtub or shower .
Inspect the product for any
visible damage before use . Do
not operate a product that has
been damaged or fallen .
This product is not equipped
with a unit for controlling the
room temperature . The product
must not be used in small
rooms inhabited by persons
who cannot leave the room
independently, unless continuous
monitoring is guaranteed .
WARNING! Hot
surfaces! Some parts of
the product may become
very hot and can cause burns .
Special care should be taken
when children and vulnerable
persons are present .
Defective components may
only be replaced with genuine
spare parts . Only genuine
parts guarantee that safety
requirements are met .
Protect the product from moisture
and liquid penetration .