Chapter 7 Making Nut Milk; Chapter 8 How To Disassemble - Fretta Boost Bedienungsanleitung

Chapter 7 MAKING NUT MILK

Using almond or cashew nut milk instead of dairy is a fantastic idea and
really simple to do with your new juicer. Assemble the juicer and use the
juice filter, just like you were going to make juice.
Soak nuts such as almonds overnight in a bowl. The next day replace the water
with fresh water. Add the nuts along with the fresh water using a ladle into the juicer
for delicious nut milk!

Chapter 8 HOW TO DISASSEMBLE

Turn the rotary knob to OFF and unplug the power cord from the plug socket.
Extract all the remaining produce in the juicing bowl before stopping the juice. For
easier clean up, operate the juicer for an additional 30 seconds after the juicer has
finished extracting.
www.iFretta.com / www.fretta.co.uk
1
Close the anti drip tap. Remove the pulp
and juice cups.
Open the lid of the juicing jug, then
remove the juicing jug by rotating
2
anti-clockwise until the ▲ on the chute
aligns with the padlock. Lift the juicing
jug off.
Remove the auger by lifting from the
3
bowl. If it is stuck, gently rotate until
loose.
6
E-mail:support@fretta.net