Fretta BOOST Bedienungsanleitung Seite 11

Q4 The drum lid will not close:
•Make sure the auger is pushed all the way in to the strainer in order for the drum
lid to close properly. If the auger is not properly in position, the drum lid may not
close.
Q5 Odd noise from the juicer:
•Check if the parts are assembled correctly. Try reassembling the parts and listen
for the odd noise. Do not start the juicer unless there are ingredients and/or liquid
in it.
•If excessive noise occurs when ingredients are inserted into the juicer, check the
size of the ingredients. Try cutting up dense/stringy/hard fruits and vegetables.
•Noise can occur if the juicer is operated on an uneven or slanted surface. Place
the juicer on a horizontally flat surface when operating.
Q6 Juice dripping down the body of the base:
•If the silicone valve lip on the bottom of the juicing bowl is not plugged in correctly,
the juice may seep out on to the juicer base. Before assembling the parts, check
and make sure the compression silicone is plugged in correctly.
Q7 Discolouration of the plastic parts:
•After juicing, if the juicer is not cleaned right away, the remaining pulp inside the
juicing jug and auger can dry up which can make disassembling and cleaning hard.
This can also affect the juicer's performance and colour.
•Ingredients that are rich in carotenoid such as carrots and spinach may dye plastic
parts. When the parts are dyed with carotenoid please use mild detergent to clean.
•Do not use vegetable oil on the juicer. Vegetable oil or oil from animal fat affects
the juicer's performance and will result in damaged parts.
Q8 Using for purposes other than juicing:
•This juicer is designed to juice ingredients like fruits and vegetables. Do not use
the juicer for extracting vegetable oil.
9
www.iFretta.com / www.fretta.co.uk E-mail:support@fretta.net