Chapter 5 How To Assemble - Fretta Boost Bedienungsanleitung

Chapter 5 HOW TO ASSEMBLE

Wash the parts before first use. The juicer may leak and not turn on if assem-
bled incorrectly.
www.iFretta.com / www.fretta.co.uk
Always check the silicon valve plug is
1
inserted into the bowl (particularly after
washing).
Position the juicing bowl onto the base,
2
aligning the juice and pulp spouts.
Once the bowl is in position, place the
auger firmly into the centre of the bowl.
3
Make sure it touches the bottom, other-
wise it will not be possible to close the
cover of the juicing jug.
Notice: Keep the lid of the juicing
jug open, position the juicing jug so that
4
the ▲ on the chute aligns with the
padlock. Twist the juicing bowl until it
clicks. This will release the safety mech-
anism.
Place the juice and pulp cups under the
correct spouts. The juice jug has
5
measurements and a spout to pour. it's
juice time!
4
E-mail:support@fretta.net