Sony XT-DTV1 Bedienungsanleitung Seite 19

The default settings are underlined.
Settings
OSD Language
Audio Language
Set Local Time
Summer Time
Antenna feed 5 V
Screen Format
TV Type
Start On Channel
Note
After changing the above settings, you need to close the Main Page by pressing (EXIT)
repeatedly to make the settings effective.
Setting options
Default: English
Changing the OSD language.
Default: English
Changing the audio language.
1 Press (ENTER) on "Audio Language".
A popup window showing the 4 language priorities appears.
2 Press < or , repeatedly to select the desired audio language for
each priority.
3 Press M or m repeatedly to select "OK" to change the setting or
"CANCEL" to cancel the setting.
Note
You can select the desired audio language priority under the
condition that the selected language is supported by the channel.
Settable time: –12:00 to +12:00 (default setting is "0:00")
Setting the time zone. This will affect the time of the unit and EPR
time.
ON, OFF
Setting the Summer Time. Turning on this selection forwards the time
for one hour.
ON, OFF
Selecting whether to feed or not 5 volts from the unit to the antenna. If
you use the TV antenna amplifier unit, turn it ON (5 V, 20 mA ANT 1/
ANT 2). If you use a TV antenna without amplifier, turn it OFF.
4:3, 16:9, 4:3 letter box
Setting the screen mode.
4:3:
An image with an aspect ratio of 4 to 3.
16:9: An image with an aspect ratio of 16 to 9.
4:3 letter box: An image with an aspect ratio of 4:3 enlarged to the
edges of the screen.
NTSC, PAL, PAL&NTSC
Setting the colour system to NTSC or PAL.
Setting the channel to start when the unit is turned on.
1 Press (ENTER) on "Start On Channel".
A popup window with a channel list appears.
2 Press M or m repeatedly to select the channel.
3 Press (ENTER).
Note
Once you set the Start On Channel, a message box appears to
confirm if you want to activate the Start On Channel. In this case,
select "OK" to change the setting, or select "CANCEL" to cancel.
19