Werbung
Accessories
Micro-Tube Holder - Mixes (48) 0,25 to 2mL microtubes. Requires
Insert Retainer.
Descrip on
Micro-Tube Holder (2 pk)
Insert Retainer
Micro-Well Plate Holder - Ideal for mixing 96 well plates or deep well
blocks. Requires Insert Retainer.
Descrip on
Micro-Well Plate Holder (2 pk)
Insert Retainer
9 to 13mm Tube Holder - Ideal for mixing 5mL culture tubes and
micro-vials. Requires Insert Retainer.
Descrip on
9 to 13mm Tube Holder (2 pk)
Insert Retainer
14 to 19mm Tube Holder - Ideal for mixing up to (8) 15mL centrifuge
tubes. Requires Insert Retainer.
Descrip on
14 to 19mm Tube Holder (2 pk)
Insert Retainer
Ampule Tube Holder - Mixes up to 4 storage vials and test tubes.
Descrip on
15-17mm Ampule Tube Holder
10-17mm Ampule Tube Holder
Tube Holder Kit
Descrip on
Includes: (1) 9-13mm Tube Holder,
(1) 14-19mm Tube Holder, (1) 20-
25mm Tube Holder, 1 Flat Foam
Insert, 2 Vessel Harness, and 1
Insert Retainer
Cup Head - Designed for mixing one tube at a me.
Descrip on
Cup Head
1,5 to 2mL Micro-Tube Holder - Mixes (18) 1,5 to 2mL micro-tubes.
For use with Single Tube Holder.
Descrip on
1,5 to 2mL Micro-Tube Holder
14
vwr.com I Instruction manual VWR
®
Fixed Speed Analogue Digital & Pulsing Vortex Mixers
Part Number
444-0218
444-7048
Part Number
444-0219
444-7048
Part Number
444-7051
444-7048
Part Number
444-7052
444-7048
Part Number
444-0212
444-0213
Part Number
444-7047
Part Number
444-7060
Part Number
444-0216
20 to 25mm Tube Holder - Ideal for mixing up to (8) 50mL
centrifuge tubes. Requires Insert Retainer.
Descrip on
20 to 25mm Tube Holder (2 pk)
Insert Retainer
Flat Foam Insert - Ideal for custom applica ons. Can be cut or
drilled to fit your specifica ons. Requires Insert Retainer.
Descrip on
Flat Foam Insert (2 pk)
Insert Retainer
Vessel Holder - Mixes Erlenmeyer flasks and media bo les.
Requires Insert Retainer.
Descrip on
Vessel Harness (2 pk)
Insert Retainer
Stainless Steel Micro-Tube Holder - Mixes up to (12) 1,5 to 2mL
micro-tubes. Stainless steel construc on.
Descrip on
Micro-Tube Holder
Single Tube Holder - Single tube, hands free mixing. Easily a aches
to the top of any Vortex Mixer with the use of a strong magne c
base. Accepts tubes from 6,4 to 11,4cm in length. Minimum tube
diameter of 1,9cm.
Descrip on
Single Tube Holder
7,6cm Rubber Head Cover & 7,6cm Head- Designed for mixing
irregular shaped objects.
Descrip on
7,6cm Rubber Head Cover
7,6cm Head
7,6cm Head with Rubber Cover
0,5mL Micro-Tube Holder -Mixes (24) 0,5mL micro-tubes. For use
with Single Tube Holder.
Descrip on
0,5mL Micro-Tube Holder
Part Number
444-7053
444-7048
Part Number
444-0211
444-7048
Part Number
444-7050
444-7048
Part Number
444-0214
Part Number
444-0217
Part Number
444-7059
444-7058
444-0208
Part Number
444-0215
EN
Werbung
