Segway Gokart PRO2 Bedienungsanleitung Seite 10

power surges and voltage spikes.
4. Only use the charger specified by the manufacturer. Do not use a charger from any other product.
5. Only use Ninebot or Segway approved parts and accessories. Do not modify your Gokart. Modifications to your Gokart
could interfere with the operation and performance of the Gokart, which may result in serious injury and/or damage,
and could void the Limited Warranty.
Maintenance and Storage:
1. Be sure the Gokart is powered off before performing any maintenance or when installing or replacing parts.
2. When installing components, use proper and sufficient force until the component is secure. If the installation is too loose
or too tight, the Gokart may not function properly, resulting in the potential for injury to you or others or damage to, or
malfunction of, the Gokart.
3. Install batteries for the Gokart in accordance with the instructions and ensure that the positive and negative electrodes
of the batteries are installed correctly. Only use the batteries specified by the manufacturer. Do not charge the batteries
as this may cause a risk of fire or explosion. Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable batteries. When the batteries are dead, purchase and replace them.
4. Follow all instructions contained in the Ninebot S-Max User Manual when performing maintenance.
5. Do not use a strong water flow or high-pressure hoses to clean the Gokart. Avoid getting water in the charge port. If
your Gokart has been exposed to heavy rain store it outdoors away from buildings and people but protected from the
elements until it is dry.
6. Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. Store indoors when not in
use. The Ninebot S/S-PRO should be stored in an environment where the temperature is no higher than 122°F (50°C) or
lower than -4°F (-20°C). If the temperature of the storage environment is lower than 32°F (0°C), do not charge it until
after placing it in a warm environment: over 50°F (10°C).
7. Do not charge the Gokart when the charge port, charger, or power socket is wet. Only use the original charger provided
by Ninebot or Segway when charging. Do not charge dry cells.
The data and parameters of the product vary with different models. They are subject to change without prior notice. Go to
www.segway.com for updated information.
8