HP PageWide XL Druckerserie Einführende Informationen Seite 6

View and confi gure the printer's network
settings.
View information about the printer's usage
of paper and ink.
Find information about the printer.
If the printer is left idle for some time, it goes into sleep mode and switches off the front-panel display.
To change the time that elapses before sleep mode, press
time between 20 and 240 minutes; the default time is 20 minutes.
The printer can be woken from sleep mode by the Power button, by sending a print job, by inserting a page in the scanner
(MFP printers only), or by opening a door or a drawer, or installing/uninstalling the high-capacity stacker.
Front-panel error codes
The printer may occasionally display a system error, consisting of a numerical code of 12 digits followed by the recommended
action that you should take.
In most cases you will be asked to restart the printer, because when the printer starts it can diagnose the issue better and
may be able to fi x it automatically. If the problem persists after restarting, you should contact your HP support representative
and be ready to give the numerical code from the error message.
If the error message contains some other recommended action, follow the printer's instructions.
Mobile Printing
With HP Mobile Printing Solutions in just a few simple steps you can print remotely wherever you are, by sending an email to
your printer with a PDF, TIFF, or JPEG attachment.
Enable email printing
1. Make sure that your printer is correctly connected to the Internet.
2. On the front panel, press
3. Press the icon and Enable HP Connected
the Connectivity application.
4. This is an optional step: Activate your account by clicking the activation link that you will receive by email. If you don't
see the message, remember to check your junk email folder.
5. This is an optional step if you are the printer administrator: Log in at HP Connected (http://www.hpconnected.com) to
customize your printer's email address or manage the printer's security for remote printing.
Congratulations, you now have completed Web Services setup. HP ePrint is ready to use.
For the latest information, support, and terms of use of the HP Connected see http://www.hpconnected.com (check your
region's availability).
You can also benefi t from automatic fi rmware updates after following this setup.
, then
, on the home screen or open the Connectivity application >
connectivity. The status and assigned printer email address will appear in
Perform operations to improve the
print quality.
View and change specifi c printer settings.
System > Power options > Printer
HP Connected
Sleep. You can set a
tab.
5
Introductory Information