HP PageWide XL Druckerserie Einführende Informationen Seite 3

Turn off the printer and call your service representative in any of the following cases:
• The power cord or plug is damaged.
• The drying enclosures are damaged.
• The printer has been damaged by an impact.
• There is any mechanical or enclosure damage.
• Liquid has entered the printer.
• There is smoke or an unusual smell coming from the printer.
• The printer has been dropped.
• The drying module has been damaged.
• The printer is not operating normally.
Turn off the printer in either of the following cases:
• During a thunderstorm.
• During a power failure.
Take special care with zones marked with warning labels.
Electrical shock hazard
WARNING: The internal circuits of the drying system, built-in power supplies, and power inlet operate at hazardous voltages
capable of causing death or serious personal injury.
The printer uses a power cord. Unplug the power cord before servicing the printer.
To avoid the risk of electric shock:
• The printer must be connected to earthed mains outlets only.
• Do not attempt to dismantle the drying modules.
• Do not remove or open any closed system covers or plugs.
• Do not insert objects through slots in the printer.
• Take care not to trip over the cables when walking behind the printer.
Heat hazard
The printer's drying subsystem operates at high temperatures and can cause burns if touched. To avoid personal injury, take
the following precautions:
• Let the printer cool down when accessing the paper path in the case of a paper jam.
• Let the printer cool down before performing some maintenance operations.
Fire hazard
The internal parts of the printer's drying subsystem operate at high temperatures.
To avoid the risk of fi re, take the following precautions:
• The customer is responsible for meeting the printer's requirements and the Electrical Code requirements according to
the local jurisdiction of the country where the equipment is installed. Use the power supply voltage specifi ed on the
nameplate.
• Use only the power cord supplied by HP with the printer. Do not use a damaged power cord. Do not use the power cord
with other products.
• Do not insert objects through slots in the printer.
• Take care not to spill liquid on the printer. After cleaning, make sure all components are dry before using the printer again.
• Do not use aerosol products that contain fl ammable gases inside or around the printer. Do not operate the printer in an
explosive atmosphere.
• Do not block or cover the openings of the printer.
• Do not attempt to dismantle or modify the drying modules.
Mechanical hazard
The printer has moving parts that could cause injury. To avoid personal injury, take the following precautions when working
close to the printer:
• Keep your clothing and all parts of your body away from the printer's moving parts.
• Avoid wearing necklaces, bracelets, and other hanging objects.
• If your hair is long, try to secure it so that it will not fall into the printer.
• Take care that sleeves or gloves do not get caught in the printer's moving parts.
• Do not operate the printer with covers bypassed.
2
Introductory Information