Siemens KG39FPI23/01 Gebrauchsanleitung Seite 43

Fault
Displays
do not illuminate.
Floor of
the refrigerator
compartment is wet.
The cool-fresh
compartment is too
warm.
The temperature in
the freezer
compartment is too
warm.
Warning signal
sounds, "Alarm"
display lights up.
Fig. 2/4
The freezer
compartment is too
warm! Frozen food
is at risk!
Possible cause
Power failure; the fuse
has been switched off;
the mains plug
has not been inserted
properly.
The condensation
channels
or condensation
drainage pipe are
blocked.
Stopper is missing
from the condensation
drainage pipe.
The fixed setting has
been set too high
or too low (e.g. if there
is frost in the "cool-
fresh" compartment).
Appliance opened
frequently.
The ventilation
openings have been
covered.
Large quantities of
fresh food are being
frozen.
Appliance is open.
Ventilation openings
have been covered.
Too much food was
placed in the freezer
compartment at once.
Remedial action
Connect mains plug. Check whether
the power is on, check the fuses.
Clean the condensation channels
and the outlet (see "Cleaning
the appliance"). Fig. ,
Insert stopper.
The temperature in the "cool-fresh"
compartment can be corrected.
Fig. 2
Simultaneously press buttons 1
and "–" for 2 seconds until
display 3 is activated.
After twenty seconds the set
temperature is stored.
Do not open the appliance
unnecessarily.
Remove obstacles.
Do not exceed max. freezing
capacity.
To switch off the warning signal and
the flashing display, press the Alarm
button 10.
Close the appliance.
Ensure that there is adequate
ventilation.
Do not exceed max. freezing
capacity.
en
43