Switching The Appliance On; Setting The Temperature; Cool-Fresh Compartment - Siemens KG39FPI23/01 Gebrauchsanleitung

en
Switching
the appliance on
Switch on the appliance with the On/Off
button 1/2.
A warning signal sounds. "AL" flashes on
the temperature display 4.
Press the alarm button 2/10.
The warning signal switches off. The
warmest temperature is displayed briefly.
The preset temperatures are reached
after several hours. Do not put any food
in the appliance beforehand.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
■
Cool-fresh compartment: 0 °C
■
Freezer compartment: -18 °C
■
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
32
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +3 °C
to +8 °C.
1. Press selection button 1 until
refrigerator compartment display 2 is
activated.
2. Keep pressing +/– buttons 8 until
the required temperature is indicated.

Cool-fresh compartment

The temperature can be set from 0 °C to
+4 °C.
1. Simultaneously press selection
button 1 and "–" button 8 for
2 seconds.
"Cool-fresh" compartment display is
activated.
2. Keep pressing +/– buttons 8 until
the required temperature is indicated.
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
1. Press selection button 1 until freezer
compartment display 4 is activated.
2. Keep pressing +/– buttons 8 until
the required temperature is indicated.