How To Use - Panasonic EH-XT20 Bedienungsanleitung

Skin detection function
Hold the main unit tightly so that your palm
fully comes into contact with the
microcurrent panel (a) on its back. When
the titanium head senses contact with your
skin, it will automatically vibrate.
• There may be a slight noise (chatter) when
the head vibrates, but this is not a
malfunction.
• While the titanium head is kept against your skin, none of the
switches will be available.
• If the titanium head does not vibrate, there is no microcurrent
effect.
• During AUTO mode cooling or COOLING mode, there is no
skin detection or vibration. (Titanium head cooling only)
• The appliance will automatically turn off if you do not touch the
microcurrent panel or apply the titanium head to the skin for
approximately 20 seconds.
(Except for AUTO mode cooling or COOLING mode)

How to use

• Unplug the AC adaptor.
The appliance will not turn on when the AC adaptor is connected.
• Remove the protective cap before use.

• Refer to page 19 when using COOLING mode.
1
1
Prepare your skin care products.
Lotion, toner
1 Attach a cotton pad (a) into the
titanium head.
• Fix it with the cotton ring (b).
• Fix it so that the cotton pad does
not cover the depression (c).
• Use a thicker cotton pad if it
comes off easily.
2 Soak the cotton pad with lotion till it is fully
saturated.
• Make sure that lotion fully penetrates into
the inner side of the cotton pad.
Skin care products other than toner and lotion
Apply the skin care product to necessary
portions of the face.
• A cotton pad is not required.



17