Use And Operation - Klarstein 10026371 Bedienungsanleitung

Before first Use
It is advisable to clean the inside of the Party Fridge with lukewarm water using a mild detergent, and then to
dry it thoroughly prior to use.
The temperature in the fridge will depend on:
• The temperature in the surrounding area
• The frequency and duration when the lid is open.
• Contains in the fridge
Therefore length of the time may vary for the unit to reach the desired temperature set by a user.
The refrigeration system of the cabinet is designed to operate with the cabinet located on a flat surface. Avoid
tilting the cabinet side. If the cabinet must be tilted on an angle for handling or moving purposes, allow it to
sit in an upright position 20 to 30 minutes prior to plugging it in and starting the cooling of the storage com-
partment.
Getting Started
1. Insert power plug into wall outlet
2. Press power button on front (right of digital display) to turn on Fridge
3. Press the thermostat button on front (left of digital display) to adjust the desired temperature for the Fridge.
The display will flash during the adjustment. The thermostat ranges from 39 – 61 degrees F. During normal
use, the display will show the average temperature inside of fridge.
Recommended Termperature Settings
• Beer and lemonade 4°C
• White Wine 7,8 – 10 °C
• Red Wine 12,7-16°C
The following resolutions can increase the cooling function of this product:
1. When you begin to use the unit for the first time allow the unit to operate continuously for 12-18 hours.
2. Alternate the racks within the cooler in the amount of 6 hours intervals to improve cooling.
3. Increase the amount of space between the items placed in the cooler in order for the items to properly cool.
(Do not overload)

Use and Operation

8