Use And Operation - Klarstein 10028010 Bedienungsanleitung

EN
12
OPERATION
1 Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
2 Clean the interior with a clean moist cloth.
3 Insert the power supply cord into the socket.
4 Tum the thermostat dial to „5" or „low".
5 Close the door and let the refrigerator and operate it emty for 1-2 hours, before
you store any food inside.
Normal Operating
When the refrigerator works with full power, the two LEDs on the circuit board will flash.
The red one shows the power input status. The green one shows the output status of the
cooling system. Meanwhile the fan inside the refrigerator begins to work When the door
is opened, the light under the temperature adjuster will turn on automatically.
Temperature Control
• To control the internal temperature, adjust the thermostat Dial „high" is the warmest
Setting to ‚low' is the coldest The temperature range fur refrigerator is 4.5-15°C.
• When the temperature is set on one certain point and the temperature inside
reaches this point, the automatic temperature control system begins to work and the
cooling system goes into linear temperature keeping status .
Note: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may
fail to operate properly if restarted too quickly.
Cooling Speed
The temperature inside can be cooled to 4.5°C (Depending on which model) in 2 hours
(with the unit empty). When the temperature control is adjusted, the temperature will be
balanced again in a certain period. The range of the change and the temperature of the
environment determine this period.
Food Storage
After 1-2 hours of power supply, the refrigerator is adequately cooled and food can be
stored. The refrigerating temperature of our thermoelectric cooler is 4.5-15"C.