Product Description; Use And Operation - Klarstein 10011578 Bedienungsanleitung

Hints on Installation
• Set the appliance on a dry, flat, waterproof and heat-resistant surface.
• Use the adjustable feet to set up the device perfectly flat.
• The socket must be readily accessible to disconnect the unit quickly in an emergency.
• Do not install or position this unit in a bookcase, built-in wardrobe or any other confined space. Ensure good
ventilation of the unit.
• Do not place the device near amplifiers or other equipment that may be hot. The heat can damage the unit.
• Do not expose this unit to direct sunlight, high temperatures, excessive moisture and excessive vibration.
• ln order to function at its potential, the unit needs to be placed on a flat floor with 2 cm spaces at each side
and 10 cm at the backside.
• Danger: Risk of child entrapment. Before throwing away your old refrigerator, you should take off the door,
and leave the shelves in place so that children may not easily climb inside.
1 Temperature adjustor
2 Light
3 Fan mask
4 Shelf
5 Foot
6 Door
7 Door hinge
Temperature Adjustment
Put the plug into suitable outlet, the outlet and voltage should he the same as what shows on the mark of the
unit. Temperature inside the refrigerator can be adjusted by the temperature adjustor on the upper side of the
refrigerator case. The temperature range for refrigerator is 5-12 °C. When the temperature in set on one certain
point and the temperature inside reach this point, the automatic temperature control system begin to work
and the cooling system go into linear temperature keeping status. At this status, the input power will change
with the change of temperature inside the refrigerator case and so as to.
Cleaning and Care
Shut off power supply before cleaning cabinet. Take out wine and shelves, and then clean the cabinet with soda
water first and with clean water last. Do not use soap or detergent for the cabinet. Clean the cellar regularly.

Product Description

Use and Operation

6