Herunterladen Inhalt Inhalt Diese Seite drucken

Indoor Unit - Panasonic LIAC12IM6 Bedienungsanleitung

Air-to-water heatpump
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INDOOR UNIT

CAUTION
CLEANING INSTRUCTIONS
CLEANING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
INDOOR UNIT & CONTROL PANEL
• Do not splash water directly.
• Wipe the unit gently with a soft, dry cloth.
OUTDOOR UNIT
• Do not obstruct the air inlet and air outlet vents, it may cause low performance or breakdown. Please remove obstacles to
assure the ventilation.
• During winter, please clean and remove the snow near outdoor unit so that the snow does no cover the air inlet and air
outlet vents.
INSPECTION
• In order to ensure optimal performance of the unit, seasonal inspections on the unit and fi eld wiring have to be carried out
at regular intervals. This maintenance should be carried out by authorized dealer.
• Clear any obstruction at the air inlet and air outlet vents of outdoor unit.
FOR EXTENDED NON-USE
• Turn off the power supply.
NON SERVICEABLE CRITERIAS
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the control panel.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
8
• Switch off the power supply before cleaning.
TIMER
OUTDOOR
ACTUAL
HEAT
TIMER
HEATER
1
2 3 4 5 6
BOOSTER
MONTUEWEDTHU FRI SAT SUN
C
TANK
ON
QUIET
OFF
SETTING
HEATER
SOLAR REMOTE
STATUS
C
FORCE
NOT AVAILABLE
PUMPDW
OPERATION
WATER OUTLET
OFF /ON
0.2
0.1
0.3
0
0.4
MPa
HINT
HINT
• To ensure optimal performance of the unit, cleaning
maintenance has to be carried out at regular intervals.
Please consult authorized dealer.
WATER PRESSURE GAUGE
WATER PRESSURE GAUGE
0.2
0.1
0.3
0
0.4
MPa
• Do not press or hit the glass
cover with hard, pointed
objects. This may damage the
unit.
• Ensure that the water
pressure is between 0.05 to
0.2MPa.
• In case the water pressure is
out of the above range, please
consult authorized dealer.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Liav14imLiac16im6Liav16imLiav12imLiac14im6

Inhaltsverzeichnis