Parkside PMFW 310 G4 Bedienungsanleitung Seite 10

MULTI-PURPOSE TOOL
˜ Introduction
Congratulations on the purchase of your new product, hereafter referred to
only as "the product".
You have chosen a high-quality product. The user manual forms an integral
part of this product. It contains important information on operation, safety,
use and disposal. Prior to the use of the product, familiarise yourself with the
product and all operation and safety notes. For this purpose, carefully read
the following user manual and safety notes.
Only use the product as described and for the applications stated. Keep
this manual in a safe place. If you hand the product on to third parties, all
documentation must be passed on as well.
˜ Intended use
This Multi-purpose tool (hereinafter "product" or "power tool") is designed
for sawing, cutting, and sanding.
The product should preferably be used for the following materials: Wood,
plastic, drywall materials, light and non-ferrous metals, fasteners (e.g.
nails, screws), and wall tiles. The product is particularly suitable for flush
applications and applications close to the edge.
The product can work on hard materials such as ceramics and concrete with
suitable accessories.
Always use the correct accessory tools according to the intended use!
Observe the technical requirements of this product (see "Technical data")
when purchasing and using accessory tools!
Any other use or modification of the product are considered improper
use and can result in hazards such as death, life-threatening injuries and
damage. The manufacturer is not liable for any damages caused by
improper use. The product is not intended for commercial use or for any other
use.
GB 7