Nibe UKV 200 Montageanleitung Seite 9

Volume and flow increaser
52 6
44
85
In cases where the system volume in the radiator circuit is below 20 l/kW (heat pump output at 7/45 °C) and/or the
radiator flow is choked uncontrolled, a UKV tank (120) is installed as a volume and flow increaser. Plug any connections
that are not used. The T-coupling must be positioned as close to the UKV tank as possible.
Volume and flow increaser
For large houses and apartment buildings, industrial premises or similar with supply air batteries.
The accumulator tank is used as a buffer for the supply air coil. Plug any connections that are not used. The T-coupling
must be positioned as close to the UKV tank as possible. When you want to use external control for the heating sys-
tem, HP will charge UKV by means of floating condensing. The external control function manages the system from UKV
onwards.
Note! These are outline diagrams. Actual installations must be planned according to applicable standards.
VP1
99
Tillsatsvärme
15
5
VP1
P
81
B
63
44
52
63 81
A
44
Master
44 VP1
44
4
99
Tillsatsvärme
Additional heat
VP1
P
B
A
Master
VP1
52
44
88
31
81
63
38
76
SMO 10
93
35
89
94
19
52*
88
95
49
110
31
44
122
49
SMO 10
93
35
UKV 200, 300, 500
31
89
35
101
120
31
94
35
120
T
96
FG
89 35
101
120
31
35
94
120
T
GB
MAV UKV 200-500
UKV 200-500
MAV UKV 100
MAV UKV 200-500
9