ECOVACS GOAT O800 RTK Betriebsanleitung Seite 34

E671
E672
E673
GOAT stops working and
returns to the Charging
/
Station�
/
/
The GOAT is not
operating at the correct
time�
/
Other Issues or
Situations� /
EN 34
1� Place the GOAT in an area with an appropriate temperature, or wait until the
The battery temperature is battery temperature returns to normal�
out of range� 2� Restart the GOAT�
3� If the problem persists, please contact the Customer Service�
The battery voltage is low� Wait until the battery is fully charged�
Rain Sensor is triggered
Normal phenomenon, please wait until the task resumes, or you can change the
or it is the end of a
rain delay setting or schedule on the APP�
scheduled task�
The schedule for the
GOAT is not correct or the Please check if the settings are correct�
timezone is not correct�
The GOAT automatically
starts the recutting task, 1� The recutting of uncut shadow areas is set to start at 8 a�m� by default� The next
due to reasons like day, you can set the proper schedule to allow the GOAT to work within the allowed
recharging, rain delay, or time�
an uncut shadow area 2� You can also set the "Do Not Disturb" time on the APP to limit the time the GOAT
from last time because of can operate�
poor lighting�
1� You can check the error message on the APP for detailed information�
Any other abnormal
2� Resolve the issue, and then you can restart the GOAT to resume operation�
phenomena�
3� If the problem still exists, please contact the Customer Service�