Transmitter Handling - Carson Reflex Wheel Pro 4 Betriebsanleitung

TRANSMITTER HANDLING

A. THROTTLE TRIGGER
Forward/
Speed up
Neutral
C. TRIM
TH-back TH-front
'CH3' channel 3:
Here you can operate a servo using a button.
'CH3' Programming function:
You have the option of using this channel as a 'switch' or as a button.
Switch function: press and hold the CH3 button for several seconds.
(1x short beep - button function) (2x long beep - switch function)
'CH4' channel 4:
3-way switch for operating a light set or servos, for example
Brake/
Speed down
Left
„TH" Throttle Trim:
Trim the throttle servo slightly when the trigger is at the neutral
position.
„ST" Steering Trim:
If the front wheels do not align straight, use the steering trim to
adjust.
ST-left ST-right
B. STEERING WHEEL
Neutral
1. Push the trigger
forward to slow down
or brake.
2. Pull the trigger back-
ward to accelerate.
Right
23 // GB