Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Products Introduction
Submersible Pumps (referred to simply as "electric pumps") consist of a water pump, seal, and motor.
The motor is positioned at the upper part of the pump, while the water pump is located at the lower
part.
Key features include:
Flow passage impeller with a volute casing design, offering excellent anti-jam properties and
•
strong wear resistance, making them ideal for transporting large solid granules.
•
Constructed with stainless steel pump bodies and tension bars, these pumps not only
provide durability but also an aesthetic appearance.
A single or double mechanical seal is used between the water pump and the motor, with
•
O-rings applied to all static joints, ensuring a secure and leak-proof operation.
Applications:
These submersible sewage pumps are widely used in various industries, including:
•
Industry
Agriculture
•
Mining
•
•
Construction
Urban environmental protection
•
They are ideal for handling materials such as:
•
Mud
Mortar
•
Wastewater
•
•
Sewage
Excrement and urine
•
Solid granules, short fibers, wastepaper, and mud, as well as sand, farm drainage and
•
irrigation, and river and pond dredging.
Conditions for Use
Operating Conditions for the Pump:
The pump will function normally and continuously under the following conditions:
Maximum medium temperature: +40°C
•
pH range of applicable media:
•
For stainless steel pumps: 2 to 13
o
For cast iron pumps: 4 to 10
o
Medium density: 1.2 × 10³ kg/m³
•
Maximum volume of medium solids: 2%, except for pumps with cutting
•
features
Medium kinematic viscosity: 7 × 10⁻⁷ to 23 × 10⁻⁶ m²/s, except for pumps
•
with cutting features
EN
Werbung
