Nuface MINI+ Benutzerhandbuch Seite 5

N U FAC E M I C RO C U R R E N T AC T I VATO R
The essential first step to your microcurrent treatment to ensure optimal results.
• Always apply a mask-like layer of the NuFACE Microcurrent Activator in sections
as you treat with the Mini+ device.
• Refer to packaging for use by date.
T R E AT M E N T A R E AS A N D T EC H N I Q U E
The instructions below are designed to provide users with the most effective results when
followed correctly.
T R E AT M E N T
• The Mini+ device is designed to stimulate large surface areas of the face and neck, such as the
jawline, cheekbones, and forehead. Avoid using the device directly over the midline of the neck.
T EC H N I Q U E
• Using light to medium pressure, lift one side of the face and neck at a time using a gliding motion.
IMPORTANT: Always ensure that both spheres are in contact with the skin during treatment.
• Refer to your Quick Start Guide for basic glides treatment for the neck, cheeks, and forehead.
• For more advanced treatment options and holds, download the NuFACE App, or visit our website
at www.NuFACE.com.
B E FO R E U S I N G YO U R N E W D E V I C E
Follow these important steps before using your new device.
1) CHARGE YOUR DEVICE
IMPORTANT: Charge your Mini+ device for four (4) hours before the first use or until
all three (3) LED indicator lightsare lit solid.
• Remove your Mini+ device, and external power adapter from the box.
• Connect the external power adapter to the Mini+ device and plug the adapter into the wall
outlet, keeping it away from any source of water.
• The lights will increasingly illuminate, indicating that your device is charging.
• Your device is fully charged when all of the lights stay illuminated.
The Mini+ device will NOT turn on when it is charging.
2) TEST YOUR SKIN SENSITIVITY
IMPORTANT: Test your skin to make sure you are not sensitive to the NuFACE Microcurrent
Activator.
• Rub a small amount of Microcurrent Activator on your forearm and leave for 15-30 minutes
before washing it off.
• If an allergic reaction (rash, redness, etc.) develops, immediately contact NuFACE for
recommendations on alternative NuFACE formulas, DO NOT continue application of
the Microcurrent Activator with the Mini+ device until a resolution such as an alternate
Microcurrent Activator has been identified.
H OW TO U S E YO U R M I N I + D E V I C E
Get ready to Tone, Lift, and Contour.
The instructions below are designed to provide the most effective results when followed correctly.
1) CLEANSE YOUR FACE
Cleanse your face and neck with an oil-free cleanser. Men should shave before treatment —
facial hair can interfere with the conductivity of the spheres.
Note: Any cream, lotion, self-tanner, and/or oil-based products on the skin can block the
microcurrent.
2) APPLY ACTIVATOR
IMPORTANT: Always apply a NuFACE Microcurrent Activator when using your Mini+ device.
• Apply a mask-like layer of the NuFACE Microcurrent Activator section-by-section as you treat.
• Reapply activator if skin becomes dry during treatment in order to continue safely using device.
6
NF_RestageMini_UserManual_Global75117_051722.indd 7 NF_RestageMini_UserManual_Global75117_051722.indd 7
H OW TO U S E YO U R M I N I + D E V I C E ( C O N T I N U E D )
3) PREPARE YOUR DEVICE
• Remove the power adapter from the device and turn it ON by pressing the ON/OFF button.
• An ascending audible beep is emitted, the energizing hum will begin, and the lights will illuminate
indicating that your device is ON.
• Adjust the intensity level to your comfort by pressing the ON/OFF button on the front of
your device.
• As you increase or decrease intensity, an audible beep is emitted, and the number of illuminated
lights will change.
M I N I + D E V I C E I N D I CATO RS
INTENSITY LEVEL INDICATOR LIGHT
Minimum Intensity First Light Illuminated
Medium Intensity First & Second
Light Illuminated
Maximum Intensity All (three) 3 Lights Illuminated
DEVICE AUDIBLE SOUND DEVICE INDICATION
Ascending Beeps & Hums Powered ON
Descending Beeps
Powered OFF
Single Beep Intensity Adjusted
Dual-Tone Beep End of Glide Interval
(Tone occurs only during treatment)
Low-Tone Beep Battery Needs To Be Charged
(Tone occurs only during treatment)
4) BEGIN TREATMENT
You can also refer to your Quick Start guide for basic glides treatment for the neck, cheeks,
and forehead.
• Place the Mini+ device in direct contact with the treatment area.
• Always keep both spheres in contact with the skin during treatment to keep
microcurrent flowing.
• Using light to medium pressure, begin treatment by lifting one side of the face and neck at
a time using a gliding motion.
• The device emits a dual tone beep every seven (7) seconds to indicate when to move to
the next treatment area.
IMPORTANT: If you feel the electrical current and / or experience a tingling sensation on your
skin, do the following:
• Add more NuFACE Microcurrent Activator to the area you are treating.
The device will NOT contract the muscles when used as instructed.
• Lower the intensity on the device.
Lowering the intensity may also reduce or eliminate this sensation.
5) FINISH TREATMENT
• After treatment is complete, massage remaining NuFACE Microcurrent Activator into skin.
• Turn OFF the Mini+ device after treatment.
• A descending audible beep is emitted notifying you that your device is turning OFF.
The Mini+ device will automatically shut off after 20 minutes of use.
Go to the section 'CARING FOR YOUR MINI+ DEVICE' for instructions on cleaning
and maintaining your device.
7
5/17/22 12:47 PM 5/17/22 12:47 PM