Loop Recording - Azdome Pg18S Bedienungsanleitung

Loop Recording — Imin/ 3mins(Default)/ 5mins
Allow the dash-cam to continuously record. Please notice:
the dash-cam will keep deleting the oldest files automatically
when memory card gets full so that it can keep recording over
and over. Here select the length of video file for the loop
recording.
Time-lapse Record — On/Off(DefauIt)
Time Lapse recording mode allows you to capture specific
images per second at a much lower rate. So when you
combine and play those images at the normal 30fps rate,
everything seems to be moving faster in time lapse.
WDR — On/Off(DefauIt)
Wide Dynamic Range (WDR) improves the exposure by taking
the combinations of over exposed and under exposed image
into one robust wide range of lighting with higher depth
image.
System Settings
Language Multilingual, default English.
Allow to choose your desired language for dash-cam system.
EN-20
Reset Settings
Here you can restore all the settings to factory default
settings.
Version
Here you can check the current firmware
on your camera. You will need this information
future to check if newer version
Please visit: http://www.azdome.hk/downloads.htmlfor
latest fi rmware upgrade instructions.
• PLAYBACKRECORDEDVIDEOS
There are 2 different way you can access your videos.
A. Directly On The CAMERA by entering
MODE You can do this by pressing
Playback Mode.
B. On Computer
I.Please remove the Micro SD card from
directly in your laptop if you have a Micro SD Card slot
(otherwise please using a Micro SD Card reader).
2.You should be able to see drive "D" or "E" or other name
depending on the pre-installed hard drives.Once you find the
added flash drive, double click in it, then you will see the file
folders- Movie / LOCK/ Photo
version installed
in the
of firmware is available.
to the PLAYBACK
so It will enter to
camera and insert it
EN-21