3.Use a screw driver to fix the first screw, leaving the screw
loose enough to adjust the camera.
4.1nsert the camera wire through
check-ing the installation position.
5.Mark the position suitable for the second screw and drill a
small
hole for it.
6.Fix the second screw and securely tighten both screws
4.Connect
the GPS module to the dash cam, tear off the
sticker
of
GPS module
and place GPS module
dashboard.
It will take 1-3 minutes to receive GPS signal
successfully.
DO NOTplug the rear camera into the front camera while it is
turned ON. Only do so when it is turned OFF.
Hereare three examplesof where to guide rear camera' s wire.
Plug the rear camera cable into the AV
input socketoffrontcamera.
nstall Rear Camera
EN-12
the intended drilled hole
to car
Connect
the red
wire
of the camera
to the reversing
light.
FORMATTING
MEMORY
Formatting the Micro-SD card will delete all information on
the inserted Micro SDcard.1.Touch @ to stop the Mirror DVR
from recording.
2.Touch@ the to enter the Settings Menu.
3.Touch "System" and slide the screen to touch "Format".
4.Touch
"0K".
INOTE
11. Do not remove
or insert
Micro
:poweredon whichmaydamagethe memorycard.
:2.YouMUST F ormat t heMEMORY
Itime use.
•
BUTTON
FUNCTION
CARD
SD card when
the camera
is
Card incamera before first:
0 00000
18:3
aonos.29
EN-13