Fermax KIT WAY Installations- Und Benutzerhandbuch Seite 24

3. Mounting
3.1 Monitor Mounting
1. Use the screws to fix the Mounting Bracket on the wall, (fitting accesories includes
a Bracket. Two pieces of 4X25 screws are needed for fastening the Mounting
Bracket).
2. Connect the system correctly (see the later connection chapter) then hang the
Monitor into the Mounting Bracket.
3.2 Outdoor Panel Mounting
1.Mounting the Rain Cover
1
Connect the cable correctly.
4
The front cover is installed
onto the base unit.
-3-
2
The base unit is installed
on the wall.
5
Use the screw to fix the front cover.
3
Placing name label.
6
Installation is complete.