Clean the unit thoroughly inside and outside. If it is dry and the unit is not to be used for a longer period of time, store it in a dry,
dust-free and not hot place. Store the unit covered or use the original packaging to protect the unit from damage.
Protect the unit against pets climbing in, so that they cannot be trapped there.
When storing only the packaging material, please note that components of the packaging such as plastic bags, cardboard,
polystyrene parts, etc., can be dangerous for children if they play with them unattended (e.g. choking hazard). can endanger
children if they play with them unsupervised (e.g. choking hazard).
For transport, please use the original packing oft he appliance so that it is optimally protected against bump, sharp edges,
weather conditions, etc. Do not expose it to moisture or rain and avoid strong vibrations.
TROUBLESHOOTING
Problem
The device does not work
Error Codes
HHH
000
888
Contact your dealer if the issues cannot be resolved through basic troubleshooting.
CIRCUIT DIAGRAM
Cut out
Safety thermostat
Heating
Heater
Heat 1
Connection for heater
ACL 1
Connection for power supply
ACN 1
Connection for power supply and heater
CN 3
Connection for sensor
Stand 11/24 SvN
Cause and Solution
Ensure that the power plug is connected.
The device is overheating. Turn it off, let it cool down, and try again.
The heating element or relay is damaged. Contact a professional.
The temperature sensor is damaged. Contact a professional.
CN 4
CN 5
TC
Connection for sensor
Connection for cotnrol knob
Temperature sensor
Seite 17 von 19