Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• These statements are only valid for rechargeable batteries and batteries sold in the countries of the European
Union and subject to the European Directive 2006/66/EC. Different provisions can apply to the disposal of re-
chargeable batteries and batteries in countries outside the European Union.
Removing the battery before disposing of the device
• The integrated battery must be removed and disposed of separately in an environmentally friendly manner before
disposing of the device.
• Mask off the contacts and package the battery such that it cannot move in the packaging. Please also observe
any further national regulations.
16. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Tool cuts out
Motor runs, but blades do not
move
Cutting blades hot
Battery does not charge
Possible cause
• Internal wiring defective
• On/off switch defective
• Internal fault
• Blades are blunt
• Blades are deformed
• Excessive friction due to
lack of lubricant
• Power supply unit is not
connected to the mains
• Power supply is defective
• Battery is defective
www.scheppach.com
Remedy
• Contact dealer / customer service
• Contact dealer / customer service
• Contact dealer / customer service
• Have blades sharpened
• Have blades checked
• Lubricate blades
• Connect the power supply unit to the
mains
• Contact dealer / customer service
• Contact dealer / customer service
GB | 31
Werbung
