Airzone Aidoo Pro Fancoil AZAI6WSPFAN Bedienungsanleitung Seite 5

Aidoo Pro Wi-Fi Fancoil
Controller by Airzone
FUNCTIONS
Aidoo Pro Fancoil is a solution for the remote management and integration of fancoil units
via Cloud services. Thanks to its wide range of integration options, Aidoo Pro facilitates the
management of these units from home automation and building management systems, or
even from a smart thermostat, without losing functionality.
Aidoo Pro Fancoil is connected to the HVAC unit by cable. The control and configuration of this
device is carried out via Bluetooth and Wi-Fi from the "Airzone Cloud" app (available for iOS and
Android). Wireless network connection is via Wi-Fi Dual (2.4/5 GHz).
Note: For more information about our products, visit airzonecontrol.com.
The main functions of the Aidoo Pro Fancoil device are:
Unit control and error detection. The following unit parameters can be configured:
•
Unit status control (On/Off).
•
The operation mode in which the system is working.
•
Fan speed.
•
Set-point temperature.
•
Room temperature reading.
Basic mode. This allows you to limit the thermostat's available functions. This mode allows
control of the following parameters: On/Off, set-point temperature and fan speed.
Auto Mode. This allows you to define the system's automatic mode switching. The setting will
depend on whether the system is configured as 2-pipe or 4-pipe:
a.
2 pipes. Mode switching is defined based on battery temperature readings and the limit
values configured for them:
•
Battery temperature
on the system.
•
Battery temperature
on the system.
b.
4 pipes. Mode switching is defined based on two set-point temperatures, one upper and
one lower, which are set by the user:
•
Reference temp.
and the upper set-point temperature will be selected in the system.
•
Reference temp.
and the lower set-point temperature will be selected in the system.
•
Lower set-point temp.
or Heating mode and the corresponding set-point temperature will be imposed,
depending on whether the reference temperature is above or below the average of both
set-points, respectively.
≥ Minimum battery temperature
≤ Maximum battery temperature
≥ Upper set-point temp.
≤ Lower set-point temp.
≥ Reference temp.
→ Heating mode will be imposed
→ Cooling mode will be imposed
→ Cooling mode will be imposed on the system
→ Heating mode will be imposed on the system
≥ Upper set-point temp. → Cooling mode
1
EN