Cutting Techniques - Parkside Performance Pphsa 40-Li B2 Originalbetriebsanleitung

•­ Avoid­over-stressing­the­device­while­
working.
•­ With­the­clippings­collector­in­place,­
remove­the­clippings­from­the­hedge­at­
horizontal cuts towards the user. This
makes­it­easier­to­collect­the­clippings.
Cutting Techniques
• Cut thick branches beforehand using a
branch­clippers.
•­ The­double-sided­cutter­bar­enables­cut-
ting in both directions or, with a swing-
ing action, from one side to the other.
•­ In­case­of­vertical­cutting,­move­the­
hedge­trimmer­uniformly­forward­or­up­
and down in an arc movement.
•­ In­case­of­horizontal­cutting,­move­the­
hedge­trimmer­in­a­sickle-shaped­move-
ment to the edge of the hedge, so that
cut branches fall to the ground.
•­ In­order­to­achieve­long­straight­lines,­
the­placing­of­tensioned­guiding­cords­
is recommended.
Cutting Shaped Hedges:
growth­and­allows­the­hedge­to­thrive­opti-
mally. During cutting, only the new annual
growths are reduced and thus a dense
branching­and­a­good­screen­will­develop.
•­ Cut­the­sides­of­a­hedge­first.­To­do­
this, move the hedge trimmer in the
direction of growth from bottom to
top.­If­you­cut­down­from­the­top,­the­
thinner branches will move out, which
It­is­recommended­
that hedges be cut
in­a­trapezoidal­
shape,­in­order­to­
prevent­stripping­off­
of the lower branch-
es.­This­corresponds­
to­the­natural­plant­
may­result­in­some­areas­having­sparse­
growth or holes.
•­ Cut­the­top­edge,­according­to­taste,­in­a­
flat­shape,­roof­shape­or­rounded­shape
•­ Trim­young­plants­to­the­required­
shape.­The­main­growth­should­re-
main undamaged until the hedge has
reached­the­planned­height.­All­other­
shoots­are­lopped­off­to­half­size.
Care of Free-Growing Hedges:
Free-growing­hedges­are­not­shaped­when­
cut, although they must be regularly main-
tained so the hedge does not become too
high.
Connecting the device
with the Lidl Home App
The device can only be connected to
the Lidl Home App if you are using it
with a Smart Performance battery.
1. Slide the Smart Performance batteries
onto the device until they click into
place­and­press­the­charge­level­indica-
tor button (12) on the control element
(6) to activate the device.
The­smart­LED­
flashing.
2.­Enable­Bluetooth
3.­Open­the­Lidl­Home­App.
­ From­here­there­are­options­

and to connect the device.

If­this­is­the­first­device­you­want­to­con-
nect­to­the­app:
­"At home",­select­the­op-
4. On the tab
tion­"Add device".
The­app­scans­the­area­for­available­de-
vices and indicates if available devices
have been found.
GB MT
­starts­(briefly)­
­on­your­smartphone.
®
 
, ,

35