LENCO PDR-033 Bedienungsanleitung Seite 12

7. Use ≤/≥ to select Source and confirm with OK.
8. Use ≤/≥ to select between FM, DAB and Buzzer and confirm with OK.
9. Use ≤/≥ to select Repeat and confirm with OK.
10. Use ≤/≥ to select between Once, Daily, Weekends and Workday and confirm with OK.
11. Use ≤/≥ select Volume and confirm with OK.
12. Use ≤/≥ to set the volume in the bars from 8 to 20 and confirm with OK.
Note: The volume can't be set to 0.
13. Quit the menu with MODE. The alarm symbol 1
14. Switch the device to standby by short pressing on/off.
15. The selected alarm signal will sound at the set time.
When the alarm is triggered:
Press the OK button to snooze for 5 minutes or if you would like to extend the snooze time you can
press ≤/≥ repeatedly (after first pressing the OK button when the alarm is triggered) to extend the
snooze alarm to 5 – 10 – 15 or 30 minutes.
Press The on/off button to deactivate the alarm signal. (The alarm will sound the next day when
configured)
Sleep mode
Setting the sleep mode
Sleep mode is a timer which turns off the device after a specific configured time.
1. Press and hold MODE to open the system menu.
2. Use ≤/≥ to select Sleep and confirm with OK.
3. Use ≤/≥ to select between 15 - 30 - 45 - 60 - 75 – 90 - 105 - 120 minutes or Off.
4. Short press the OK to confirm.
The display shows the sleep symbol
or 2
and the remaining sleep time.
12
lights up in the display.