LENCO PDR-033 Bedienungsanleitung Seite 11

Note: if the radio was connected to another device before, long press the OK button until 'pairing' is
shown on the display
3. Start the device scan on your mobile device.
4. Select: "Lenco PDR-033" on your mobile device and connect the device.
5. Connected will appear on the display, a beep will sound and the name of the connected device
will appear on the screen.
6. Now you can use your favorite music player app to play music.
Controlling music play.
The radio can play all music supported by your mobile device by using your favorite music player app.
First start playback on your mobile device.
You can use play functions directly on the radio unit:
Short press OK to start and pause playback.
Skip to the previous track with ≤
Skip to the next track with/≥
Use volume to adjust the volume
Note: If the volume on the radio unit is too low, turn up the volume on your mobile device.
Alarm function
Setting the alarm
Important note: In battery mode you can't use the alarm function if the device is used in battery
mode or when the device is in full off mode (long press the power button in standby mode until the
screen is black).
Following steps will guide you how to set the alarm.
1. Press and hold MODE on the volume control to open the system menu.
2. Use ≤/≥ and select Alarms. Confirm with OK.
3. Use ≤/≥ to select Alarm 1 or Alarm 2 and confirm with OK.
4. Use ≤/≥ select Alarm and use OK to switch between On and Off.
5. Use ≤/≥ select Time and confirm with OK.
6. Use ≤/≥ to set the hour and the minute, then confirm each with OK.
11