Bestway FLOWCLEAR Gebrauchsanleitung Seite 4

NOTES:
• Place the sand filter on solid, level
ground. Ensure the sand filter is at least
3.5 meters away from poolside. Keep
distance as far as possible.
• Pay attention to position pool and sand
filter so adequate ventilation, drainage,
and access for maintenance is available.
Never place the sand filter in an area
that may accumulate water, or on a
walking path with lots of foot traffic.
• It is necessary to have the plug accessible after installation of the
pool. The plug of the sand filter shall be at least 3.5m away from
the pool.
• Atmospheric conditions may affect the performance and life span
of the sand filter; take adequate precautions to protect the sand
filter from unnecessary wear and tear that may occur during
periods of cold or hot weather and/or exposure to sun.
• Please examine and verify all sand filter components are present
before use. Notify Bestway at the customer service address listed
on this manual for any damaged or missing parts at the time of
purchase.
• It is imperative to change as soon as possible all deteriorated
parts. Only use parts approved by the manufacturer.
• Do not allow children or adults to lean or sit on the apparatus.
• Do not add chemicals to the sand filter.
• When chemical products are used to clean the pool water, it is
recommended to respect a minimum filtration time to preserve
the health of swimmers which depends on compliance of health
regulation.
• Only the media provided or specified by the manufacturer is to
be used with product installation.
• It is essential to check that the suction openings are not obstructed.
• It is advisable to stop the filtration during maintenance operations
on the filtration system.
• Regularly monitor the filter clogging level.
• A weekly check is recommended for backwashing or cleaning.
4
POOL
>3.5 m