Create Warm Wall Bedienungsanleitung Seite 9

TE MP E R ATUR E SE LECT IO N
• After connecting the heater, when the display shows the temperature, press the increase
buttons or decrease
• To modify the temperature in the different modes, you will have to first select the mode you
want and then select the desired temperature.
• In Comfort Mode the temperature can be adjusted between 5-35ºC.
• In ECO Mode the temperature can be adjusted between 1-31ºC.
W E E K LY TI ME R SE T T ING
1. Press the timer button
2. The screen will show " "then press the increase buttons
day of the week (1-7).
3. Press the timer button
display will show . Press the increase buttons
4. Press the timer button again
the display will show
minute.
5. Finally press the timer button
Note: The clock and calendar will be reset to factory defaults if the device is turned off or
the light is not on.
MO D E SE LECTI ON
• Press the mode selection button
• When you press the button
to adjust the temperature you want.
for 3 seconds to access the clock and day of the week settings.
1
2
3 Wednesday
4 Thursday
5
6 Saturday
7
to confirm the day setting and enter the clock time setting, the
to confirm the hour setting and enter the minute setting,
. Press the increase buttons
to confirm all selected settings.
to access the mode you want.
, the heating mode works in a continuous cycle as follows:
or decrease
Monday
Tuesday
Friday
Sunday
or decrease
or decrease
to select the
to set the current time.
to set the current
E NGLI SH
9