Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
※
Please make sure your computer has USB2.0 port correctly installed and functioning !! ( Please
update your WinXP to SP2, or Win2000 to SP4, and updating USB 2.0 host driver before
installation to make sure computer's USB 2.0 is functioning correctly)
Steps : (1) Install Driver
(2) Plug in USB 2.0 Audio/Video Grabber hardware
(3) Install "VHS to DVD" Capture/Edit/Burning software
2.1 Hardware device description
USB 2.0 connector Audio L/R input Composite Video input
USB 2.0 connector : Connect to USB 2.0 port of your computer
S-Video input : S-Video input from external A/V device (e.g. VCR)
Composite video input : Composite video input from external A/V Device (e.g. VCR)
Audio L/R input : Audio input from external A/V device (under WinXP/Vista)
(In Win 2000 – recommend connecting external A/V device audio to
Line-in of sound card)
2.2 Driver Installation
2.2.1. Please insert "Multimedia Installation Kit" CD-ROM into your CD-ROM drive;
Run " E:\Driver\Setup.exe "; (assuming CD-ROM drive in E drive)
Note: In Vista, windows will pop up a dialogue box, choose "Allow" to continue
install Driver.
Chapter 2. Installation
3
S-Video input
Click "Next"
Werbung
Inhaltsverzeichnis
