Mounting Instructions; Start-Up - Bosch Bth-Rm Bedienungsanleitung

Room thermostat II

Mounting instructions

▶ When selecting the mounting location and when drilling, pay attention
to the areas where electrical wires run, or to any supply cables.
‫ ܬ‬You can also use the explanatory video and additional information on
our website as an additional aid for mounting, installing, starting up and
restoring the factory settings on your Bosch Smart Home room thermo-
stat II:
→ https://www.bosch-smarthome.com/rom/room-thermostat-2

Start-up

Ensure that you have a Bosch Smart Home controller and the Bosch Smart
Home app and have successfully configured both. Now start the Bosch
Smart Home app and select "Add new device". Follow the instructions in
the app.
The status LED (3) shows the status of the room thermostat using flashing
codes.
Signal Meaning
Pairing mode (is active) or
Flashes
device is communicating with
orange
the controller
Flashes Pairing mode (successful) or
green process confirmed
Flashes red Pairing mode (not successful)
1x or process failed
Flashes red
every 15 Functional error
seconds
↑Contents
8-750-002-892 | V001 | 01/2024
Measures
Please wait
–
If this is the first pairing attempt, please try
again. Otherwise reset the device to the
factory settings and contact the service
department if necessary.
Look for information in the Smart Home app.
Contact the service team if necessary.
English | 9
Bosch Smart Home