Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning and Maintenance
6.4 Replacing the LED lighting
WARNING!
Risk of electric shock!
To avoid the associated dangers, all work involving the LED lighting
may only be carried out by a suitably qualified person!
For this purpose, the appliance must be disconnected
from the power supply!
CAUTION!
Risk of injury!
The light from LED lamps is very bright and can damage your eyes!
Avoid looking directly into the light when it is switched on!
Pay also attention to children in this regard, especially babies!
Proceed as follows to replace a lamp:
• Obtain a new LED lamp of the same type as those
already installed in the model.
P ropertiesoftheLEDlamps
• Type: L11, round, Ø 68 mm
• Wattage: 1.5 W
• Voltage: AC 110-240
• Make sure that the appliance is completely
disconnected from the power supply
and that all components have cooled down
before you start replacing the lamps!
• Remove the corresponding metal grease filter
to access to the inside of the appliance,
remove the lamp from the holder (1)
and disconnect the plug (2).
• Plug in the new lamp (3)
and refit it in the reverse procedure
to that for removing it (1).
• Before continuing to operate the appliance,
make sure that all filter components
are fully reinserted!
34
2
1
2
3
Werbung
