cecotec PROCLEAN 5010 INVERTER Bedienungsanleitung Seite 29

ENGLISH
Control panel
Fig. 4
1. Display
2. Microwave button
3. Defrost button
4. Clock button
5. Timer button
6. Knob
7. Stop/Cancel button
8. Start/30 sec. button
Setting the time
1. Press the button once, "0:00" will appear on the display.
2. Turn the knob to set the desired hour. The hours value must be between 0 and 23.
3. Press the button to confirm the settings.
4. Next, turn the knob to set the minutes. The minutes value must be between 0 and 59.
5. Press the button to confirm the settings. The time is now successfully set.
Note:
- The clock is a 24-hour clock. If the time is not set, it will not appear when switching on the
microwave.
- To set the time again, follow the steps above.
Setting the timer
1. Press the button once, "0:00" will appear on the display.
2. Turn the knob to select the desired operating time. The maximum time value is 95:00
minutes.
3. Press the button to confirm the setting. When you do so, the countdown will start.
Switching on the microwave
1. Press the button once, "P100" will appear on the display.
2. Press the button repeatedly or turn the knob to select the power you want. This
microwave features 5 power levels.
3. Press the button to confirm the settings.
4. Turn the knob to set the operating time. The maximum time value is 95:00 minutes.
5. Press to switch on the microwave
Note: if you open the door or if you press the
This microwave features 5 power levels.
56 PROCLEAN 5010 INVERTER/PROCLEAN 5010 INVERTER WHITE
.
button, operation will be paused.
Power level
Information shown on the display
Modes
1. Fast heating
1. In standby mode, press the button to heat food at 100% power for 30 seconds. Each
time you press the button, time will increase by 30 seconds. The maximum value is 95
minutes.
2. In standby mode, turn the knob to the left to select the time you want the microwave
to operate at 100% power. Turn the knob to set the operating time. Next, press the
button to switch on the appliance.
Note: each time the button is pressed, the operating time will be increased by 30 seconds.
This does not apply to the defrost by weight function, the automatic programme or the first
phase of the multi-phase heating.
2. Defrost by weight
1. Press the button once, "dEF1" will appear on the display.
2. Turn the knob to select the food weight. The weight range is from 100 to 2000 grams.
3. Press the button to start defrosting.
Note: a beep will sound to indicate that you have to turn the food over during this process. The
microwave will continue to defrost even if no operation is performed.
3. Defrost by time
1. Press the button twice, "dEF2" will appear on the display.
2. Turn the knob to select the desired defrosting time. The maximum time value is 95:00
minutes.
3. Press the button to start defrosting.
Note:
- When half of the cooking time has elapsed, the appliance will beep to remind you to turn
the food over. The microwave will continue to defrost even if no operation is performed.
- The default power level is P30 and cannot be changed.
4. Multi-phase heating
Note:
- You can select two heating phases.
- If you select the defrost function, it will automatically operate in the first phase.
- The automatic programme cannot be configured as one of the heating phases in multiple
phases.
PROCLEAN 5010 INVERTER/PROCLEAN 5010 INVERTER WHITE
ENGLISH
100% 80% 50% 30% 10%
P100 P80 P50 P30 P10
57