cecotec PROCLEAN 5010 INVERTER Bedienungsanleitung Seite 30

ENGLISH
Example: imagine you want to defrost food for 5 minutes and then heat it at 80% power for 7
minutes.
1. Press the button twice, "dEF2" will appear on the display.
2. Turn the knob to select 5 minutes.
3. Press the button once, "P100" will appear on the display.
4. Press the button repeatedly to set the microwave at 80% power.
5. Press the button to confirm the settings.
6. Turn the knob to set 7 minutes of operation.
7. Press to switch on the microwave.
5. Automatic programme
1. Turn the knob clockwise until "A-01" appears on the display.
2. Turn the knob to choose the desired programme from the 8 available.
3. Press the button to confirm the settings.
4. Turn the knob to select the food weight.
5. Press to switch on the microwave.
Note: to select the automatic programme, you will have to turn the knob clockwise in standby
mode. Turning it to the left adjusts the fast warm-up time.
Table of available programmes
Programme Weight
200 g
A-01
400 g
Automatic
600 g
heating
A-02 200 g
Vegetables
300 g
400 g
250 g
A-03
350 g
Fish
450 g
250 g
A-04
350 g
Meat
450 g
58 PROCLEAN 5010 INVERTER/PROCLEAN 5010 INVERTER WHITE
Information shown on the Power
display
200
P100
400
600
200
P100
300
400
250
P80
350
450
250
P80
350
450
A-05 50 g (with 450 ml of
Pasta cold water)
100 g (with 800 ml of
cold water)
230 g
A-06
460 g
Potatoes
690 g
A-07 200 g
Frozen pizza
400 g
A-08 200 ml
Soup
400 ml
6. Query function
1. If you have set the time, it will appear on the display for 3 seconds as long as you press the
button while the microwave is in operation.
2. You can also press the button to check the power. This value will be shown on the
display for 5 seconds.
7. Safety child lock
You can use this function to prevent children from accidentally switching on the microwave.
Activating the child lock
1. In standby mode, press and hold the
2. The display will show and a beep will sound.
Deactivating the child lock
1. Press and hold the button for 3 seconds. A beep will sound.
8. ECO mode
Activating the ECO mode:
1. In standby mode, press the button twice (do not allow more than one second between
presses).
2. "ECO" will be shown on the display for 3 seconds and this mode will be activated.
3. When the microwave is in standby mode or when the child lock is activated, the display will
turn off if no operation is performed for more than one minute.
4. Press any button or open and close the door to make the display light up again.
PROCLEAN 5010 INVERTER/PROCLEAN 5010 INVERTER WHITE
ENGLISH
50
P80
100
230
P100
460
690
200
P100
400
200 P100
400
button for 3 seconds.
59