Philips LFH 7780 Benutzerhandbuch Seite 16

the display 1 .
Press the PLAY button briefly. The default system date
3
is shown as "01" for the day and month, and "05" for
the year 2 .
Press the NEXT button to set the desired year, then
4
press the PLAY button.
The month will now blink "01". Press the NEXT button
5
to select the desired month and press the PLAY button.
The day will now blink "01". Press the NEXT button to
6
select the desired day and press the PLAY button.
7 The time will now blink. Set the time in the same manner the
date was set, using the NEXT and BACK buttons to select the
desired values .
3
After the minutes are set, press the PLAY button to save the
8
settings, then the STOP/MENU button to exit Menu mode. The
clock will begin running when the time setting is saved.
7.9 Timer Set-up
With the Voice Tracer in Stop mode, press the STOP/
1
MENU button for a few moments.
Press the NEXT button repeatedly until "TIMER" is
2
shown on the display 1 .
3 Press the PLAY button briefly. "OF" (timer setup off)
blinks on the display 2 .
1
1
Press the NEXT button to select "ON" (timer setup)
4
.
3
5 Press the PLAY button briefly, then press the NEXT
and BACK buttons to enter the desired hours
2
the hours have been set, press the PLAY button and
then set the minutes.
Press the PLAY button to set up the recording interval
6
3
5 .
Press the NEXT button to set the interval time.
7
Press the PLAY button, then press the NEXT button to
8
select the folder to record to
Press the PLAY button to save your settings, then the
9
STOP/MENU button to exit Menu mode.
7.10 Alarm Setup
With the Voice Tracer in Stop mode, press the STOP/
1
MENU button for a few moments.
2 Press the NEXT button repeatedly until "ALARM" is
1
shown on the display
Press the PLAY button briefly. "OF" (alarm setup off)
3
blinks on the display
2
Press the NEXT button to select "ON" or "V" (Voice).
4
Select "ON" to use the beep tone as alarm or "V"
(Voice) to use a recorded file or music file as alarm
4 . Once
6 .
1 .
2 .
3
4
5
6
1
2
3
3 .
User manual