Silvercrest SHFD 1400 C1 Bedienungsanleitung Seite 45

10. Cleaning
DANGER of burns!
Let the device cool down before moving
or cleaning it.
DANGER! Risk of electric
shock!
Pull out the mains plug 11 from the wall
socket before cleaning the hot air fryer.
The hot air fryer must not be immersed
in water.
WARNING! Risk of material damage!
Do not clean using sharp objects or
abrasive cleaning agents.
NOTE: please note that water drops may
still be present in cavities after drying. Allow
all parts to air dry completely.
Accessories
• Remove coarse food residues.
• The frying basket 5 and screen assem-
bly 6 can be cleaned in the dishwasher.
Press the screen assembly upwards out of
the frying basket. When replacing after
cleaning, ensure that the curve of the
screen assembly is facing upwards.
Press down the screen assembly at the
edges until it noticeably clicks into
place.
NOTE: you can also clean these parts by
hand with warm water and detergent. Then
rinse thoroughly with clean water.
• Soak burnt-in food leftovers beforehand.
• Clean the pan 10 by hand with warm
water and detergent. Then rinse thor-
oughly with clean water.
• Let all parts dry completely before you
put them away or use the device again.
Housing
• Wipe the housing 1 from the outside
with a damp cloth and a little mild de-
tergent.
• Dry with a tea towel.
Interior
1. Clean the interior with a soft sponge, a
little water and mild detergent.
2. Wipe several times with a damp mi-
crofibre cloth which you should wash
and wring out in between.
3. Dry with a tea towel.
11. Storage
• Before putting the hot air fryer away,
make sure that ...
... the mains plug 11 has been pulled
out,
... the device has cooled down and
... all parts are completely dry again.
• Wind the power cable 11 around the
cable spool 12.
41
GB