Onkyo TX-8270 Bedienungsanleitung Seite 5

> Before Start > Part Names
diameter).
14.PURE AUDIO button/LED (European models): Turns
on or off the Pure Audio mode which provides a purer
sound and turns off the display and cuts off analog
video circuits. The LED lights when it is on, the display
turns off, and the "Bass" and "Treble" settings are
disabled.
0 Pure Audio mode cannot be selected when using the
Multi-zone feature. Activating the Multi-zone feature
while this mode is selected automatically switches
the listening mode to Direct.
15.RT/PTY button (European models): Used when
receiving stations transmitting text information.
16.DIMMER button (North American models): You can
adjust the brightness of the display in three steps. It
cannot be turned off completely.
17.SPEAKER A/B button: Select the terminals to output
audio from between SPEAKERS A/B.
18.INPUT dial: Switches the input to be played.
19.BASS dial: Adjusts the bass.
20.TREBLE dial: Adjusts the treble.
21.BALANCE dial: Adjusts the balance of the sounds
output from the left and right speakers.
22.BGM 1/2/3/4 buttons: Preset your favorite DAB
(European models)/AM (North American models)/FM
radio stations (P27, 30).
23.USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (5 V/1 A) to USB devices with a USB
cable.
> Install > Initial Setup
  
 
Display
1. The currently selected speaker system lights.
2. Lights in the following conditions.
Ë: When headphones are connected
Z2: ZONE 2 is on.
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
HDMI: HDMI signals are input and the HDMI input selector is selected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS (European models): Receiving RDS broadcasting.
TUNED: Receiving DAB (European models)/AM (North American
models)/FM radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Standby has been set.
5. Flashes when muting is on.
6. Speaker/Channel display: Displays the output channel of the
speakers.
7. This may light when performing operations with the "NET" input
selector.
8. Displays various information of the input signals.
> Playback
Advanced Setup | Supplementary Information | Others
 
 
5
En