Setup Menu; Input/Output Assign; Advanced Setup - Onkyo TX-8270 Bedienungsanleitung

> Before Start > Part Names

Setup Menu

Advanced Setup

1
2
> Install > Initial Setup
INPUT
> Playback
Advanced Setup
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Switch the input on the TV to that assigned to the unit.
2. Press SETUP on the remote controller to display the Setup menu screen.
Setup

1. Input/Output Assign

2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
3. Select the item with D / C on the remote controller and press ENTER to confirm your
selection.
0 Change the initial values for each of the settings with the cursors B / A.
0 To return to the previous screen, press RETURN.
4. To exit the settings, press SETUP.
1. Input/Output Assign
∫ 1. TV Out / OSD
OSD Language Select the on-screen display language.
(North American models) English, German, French, Spanish,
Italian, Dutch, Swedish
(European models) English, German, French, Spanish, Italian,
Dutch, Swedish, Russian, Chinese
Impose OSD Set whether or not to display the information on the TV when the
volume is adjusted or input is changed, for example.
"On (default value)": Display OSD on the TV
"Off": Do not display OSD on the TV
0 OSD may not be displayed depending on the input signal
even if "On" is selected. If the operation screen is not
displayed, change the resolution of the connected device.
| Supplementary Information | Others
1. TV Out / OSD
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input
35
En