Herunterladen Diese Seite drucken

Listening To The Am/Fm Radio (Am: North American Models Only) - Onkyo TX-8270 Bedienungsanleitung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 259
> Before Start
> Part Names

Listening To the AM/FM Radio (AM: North American models only)

1
You can receive AM (North American
models)/FM radio stations on this unit with
the built-in tuner. Perform the following
procedure when the unit is on.
∫ Tuning into a Radio Station
Tuning Automatically
1. Repeatedly press TUNER (a) on the
remote controller and select "AM" or
"FM".
2. Press TUNING MODE on the main unit
so that "TunMode:Auto" appears on the
display.
3. When you press the cursor D/C
buttons (b) on the remote controller,
automatic tuning starts, and searching
stops when a station is found. When
tuned into a radio station, the "TUNED"
indicator on the display lights. When
26
> Install
> Initial Setup
2
tuned into a stereo FM radio station, the
"FM ST" indicator lights.
When FM broadcasts reception is poor:
Perform the procedure for "Tuning
Manually" in the following section. Note
that if you tune manually, the reception for
FM broadcasts will be monaural rather than
stereo, irrespective of the sensitivity of the
reception.
Tuning Manually
If you tune manually, the reception for FM
broadcasts will be monaural rather than
stereo, irrespective of the sensitivity of the
reception.
1. Repeatedly press TUNER (a) on the
remote controller and select "AM" or
"FM".
2. Press TUNING MODE on the main unit
so that "TunMode:Manual" appears on
the display.
> Playback
Advanced Setup | Supplementary Information | Others
3
3. While pressing the cursor D/C buttons
(b) on the remote controller, select the
desired radio station.
0 The frequency changes by 1 step
each time you press D/C. The
frequency changes continuously if the
button is held down and stops when
the button is released.
Frequency step setting (North American
models):
Press SETUP on the remote controller,
then use the cursor buttons and ENTER on
the remote controller to select "7.
Miscellaneous" - "Tuner" - "AM / FM
Frequency Step", and select the frequency
step for your region. Note that when this
setting is changed, all radio presets are
deleted.
a
b
d
c

Quicklinks ausblenden:

Werbung

Fehlerbehebung

loading