HQ Power ARAZU II Bedienungsanleitung Seite 6

DMX Start Address
o
All DMX-controlled
the signals. This digital start address is the channel number
"listen" to the DMX controller.
devices or an individual
When all devices have the same address, all the units will "listen"
•
particular channel.
simultaneously. If you set individual
number. Changing the settings
In case of the 5-channel
•
1 (CHINS), the second unit to 6 (1 + 5) (CH6NIO),
on.
Cleaning and maintenance
7.
All screws should be tightened
1.
2. The housing, visible parts, mounting
suspension, trussing)
holes in mounting supports,
Moving mechanic parts must not show any signs of wear and tear.
3.
The electric power supply cables must not show any damage.
4.
maintain the device.
5. Disconnect the device from the mains prior to maintenance
Wipe the device regularly
6.
7. There are no user-serviceable
Contact your dealer for spare parts if necessary.
8.
Technical Specifications
8.
ower suppl
power consum
fuse
DMX512
Connection
LEDs
dimensions
Total Weight
Max. Ambient
Max. HousingTemperature
Use this device with
the event of damage
For more info concerning
our website www.hqpower.eu.
The information in this
COPYRIGHT NOTICE
The copyright to this
No part of this manual or may be copied,
medium or otherwise
27/09/2011
devices need a digital start address so that the correct device responds to
The same starting
address can be set for every device.
In other words: changing
addresses,
of one channel will only affect the device in question.
VDPL300BA,
and free of corrosion.
supports
should not be deformed,
do not change the location of the connections.
with a moist, lint-free
parts.
tion
Temperature
original accessories
or injury resulted
this product and the latest
manual is subject
manual is owned
reproduced,
without the prior written
VDPL300BA
from which the device starts to
address can be used for a whole group of
the settings of one channel will affect all devices
each device will "listen"
you will have to set the start address of the first unit to
the third to 11 (6 + 5) (CHI IN 15), and so
and the installation
modified or tampered
activities.
cloth. Do not use alcohol or solvents.
max. 230 VAC / SO Hz
25 w
FIA, 250 VAC (5 x 20 mm) (order code FFIN)
5 channels
3,pin XLR
48 pcs (24 x red, 12 x green,
370 x 210 x 140 mm
3.7k
450C
sooc
only. Velleman nv cannot
from (incorrect) use of this
version
to change without
by Velleman nv. All worldwide
translated
consent of the copyright
to the control signal on one
to a separate channel
location (e.g. ceiling,
with e.g. do not drill extra
Have a qualified technician
12 x blue)
be held responsible
device.
of this manual, please
prior notice.
rights reserved.
or reduced to any electronic
holder.
Rev. 01
in
visit
CVeIIeman nv