Next Level Racing FORMULA LITE PRO Bedienungsanleitung Seite 7

1
USING NLR LITE SERIES HUBS
Open and close the Cam Lever to unlock and lock the Hubs respectively. Make sure the Cam is tightly
closed by spinning the lever clockwise before sitting in the Cockpit to avoid failure.
2
ASSEMBLY PROCESS
Insert the Backrest Bottom Tubes through the openings in the back of the Backrest. Press the Spring-Loaded Pin
to lock the Tubes in place. Use the top holes for a taller backrest and bottom holes for a shorter one.
TIGHT
LOOSE
CAM LEVER
7
Video Instruction: bit.ly/nlrbuild
Do not adjust the hubs while user is
Do not adjust the Hubs while user is
sitting in cockpit, Make sure user is out
sitting in Cockpit, make sure user is
of the cockpit before adjusting.
out of the Cockpit before adjusting.
Make sure the hubs are tightened fully
Make sure the Hubs are tightened fully
before using the cockpit. (Spin the hub
before using the Cockpit. (Spin the Hub
clockwise to ensure it is fully tight)
clockwise to ensure it is fully tight)
Repeat
on Other
Side
User Height