Philips ADD6901 Bedienungsanleitung Seite 9

6. Usage instructions
How to dispense water
1. Press the " " to wake up the appliance when the appliance is in sleep
mode.
• The appliance will automatically go to sleep mode if there is no operation
within 1 minute.
• In sleep mode, only the "Safety lock" lights up on the panel.
2. Place a mug or glass on the water drip tray.
3. Select the desired temperature and volume.
4. Press " " to unlock the appliance (not applicable for ambient water).
5. Press " " to start dispensing.
• When extracting hot water, keep your hand away from the nozzle and the
steam to avoid getting scalded.
• Press it again or touch any other buttons to stop.
• Once the cycle has been stopped, it cannot be resumed. A new cycle must
be started.
6. Long press " " for 10 seconds to disable the safety lock. The appliance
returns to ambient after water extraction if the safety lock is disabled. Press
" " for 10 seconds to enable the safety lock again.
Rinsing
• The dispenser will do auto rinsing before and after water �ltration once it is
connected with the power supply and the water tank is covered.
• Manual rinsing: long press "
rinse for 1 minute.
+ " for 3 seconds and the dispenser will
09
3s 3s